GEARSET SPRITE 3 SYNCHROMESH STRAIGHT CUT(4 GEARS)

The stock ribcase gearbox of any Spridget can be transformed into a superb racing box with the installation of straight cut gears! Not only does the straight cut design provide more strength and take significantly less power to drive but the ratios of the various gears are ideal for high performance racing! Yes, the nature of straight cut gears is that they are louder than the stock helical, but if you are racing you shouldn't care about noise, only performance. This gear set when installed will make a 948cc engine feel almost like a 1275, and a 1275 will feel like a 1500! You can always be on the proper power band of any motor! The gearset can be fitted to any ribcase that originally used the 22G1100 laygear. The first gear and the reverse gear in the standard box is retained. The installation of these gears is often done at home but it is better left to the experts. 1st/2nd gear synchro hub outer track is available as 22G1118 if worn. Ratio Comparison: Standard S/C Close ratio 2nd 1.916 1.722 3rd 1.357 1.255 4th 1.0 1.0 if all does not fit snug and change gear snoothly check the front plates as some have a 12 thou deeper bearing ridge